Attentions for installation and use 

1,The oil outlet pipeline orifices shall be cut smooth, make sure the  connection is intact and no nil leakage.  

2,In the process of installing, please ensure that interior of the  pipeline is clean.  

3,Please use the correct, clean and impurity-free NLGI 000-2 oil  grease.  

4,Applicable temperature -40℃-70℃.  Please refill oil from the correct oil refilling orifice. 

5,Do not open the  oil block to refill oil above the oil cup.  

6,Please notice environmental temperature, adjust viscosity of oil products.

Performance and characteristics

1,The lubrication pump duty cycle can be controlled by the host PLC or a separate controller.

2,It is equipped with a pressure regulating valve device, which can independently set the working pressure of the lubrication pump to ensure its safety.

3,The lubrication system is equipped with a pressure switch, which can efectively monitor the pipeline system to interupt the flow, leakage and other pressure shortage phenomenon.

4,An exhaust valve device is provided to eliminate the air in the lubrication pump chamber and ensure that the lubrication pump drains olsmoothly.

5,For low ol level transmtters, normaly open o normaly cbosed contacts can be selected depending on the system, The standard model is a

normally open contact.

6,A spring-loaded oil pan is used for vacuum suction.

7,Use a grease gun to add grease to the lubrication pump reservoir through the grease fiter to avoid impurities and air into the lubricationsystem to improve the lubrication system.

8,No pressure relief valve device in resistance system, used with GPA/GPB/GPC/GPD/GPE distributor.