Availability: | |
---|---|
Quantity: | |
ALA
Product Advantage
1. The applicable temperature range of grease is minus 5 to 120 degrees Celsius.
2. Compared with traditional lithium-based grease, this product has a dropping point, strong pressure resistance, good lubrication effect, and good mechanical stability and colloidal stability.
3. Directly replace the grease, easy to operate, environmentally friendly and hygienic.
4. This canned grease is suitable for: centralized lubrication systems of plastics, food, forging, cutting machine tools and other mechanical equipment.
Technical Parameters
Models | ALA | ||
Grease grade | 000# | 00# | 0# |
Dropping Point | Not less than 160 | Not less than 165 | not less than 170 |
Proper temperature | "-5℃-120℃" | ||
Working cone penetration 0.1mm | 445-475 | 400-430 | 355-385 |
Corrosion (T2 copper, 100 ℃ 24 h) | No green or black discoloration of copper sheets | ||
Corrosion resistance (52'℃, 24h) | qualified | ||
Water loss(38℃,1h),(mass fraction)% | no more than 12 | no more than 8 | no more than 7 |
Extreme pressure performance (fourball machine method) PBN | Not less than 588 | ||
Evaporation (99'C, 22 h), % | Not less than 2% | ||
Sintering load PD value kgf | 250 | 250 | 250 |
Product Uses
1.Wind turbine main shaft bearings
2.Large bearing applications
3.Heavy industrial applications
4.Centralized lubrication system
Product Advantage
1. The applicable temperature range of grease is minus 5 to 120 degrees Celsius.
2. Compared with traditional lithium-based grease, this product has a dropping point, strong pressure resistance, good lubrication effect, and good mechanical stability and colloidal stability.
3. Directly replace the grease, easy to operate, environmentally friendly and hygienic.
4. This canned grease is suitable for: centralized lubrication systems of plastics, food, forging, cutting machine tools and other mechanical equipment.
Technical Parameters
Models | ALA | ||
Grease grade | 000# | 00# | 0# |
Dropping Point | Not less than 160 | Not less than 165 | not less than 170 |
Proper temperature | "-5℃-120℃" | ||
Working cone penetration 0.1mm | 445-475 | 400-430 | 355-385 |
Corrosion (T2 copper, 100 ℃ 24 h) | No green or black discoloration of copper sheets | ||
Corrosion resistance (52'℃, 24h) | qualified | ||
Water loss(38℃,1h),(mass fraction)% | no more than 12 | no more than 8 | no more than 7 |
Extreme pressure performance (fourball machine method) PBN | Not less than 588 | ||
Evaporation (99'C, 22 h), % | Not less than 2% | ||
Sintering load PD value kgf | 250 | 250 | 250 |
Product Uses
1.Wind turbine main shaft bearings
2.Large bearing applications
3.Heavy industrial applications
4.Centralized lubrication system