Pneumatic thin oil lubrication pump BEH

Pneumatic thin oil lubrication pump BEH

Powered by compressed air. 

The solenoid valve is controlled by the host PLC or the oil pump controller to  determine the oil supply cycle of the lubrication system. 

The solenoid valve is electrified to control the pneumatic pump, and the  electrification time of the solenoid valve is ≥5 seconds. 

The solenoid valve is de-energized and the pneumatic pump is depressurized,  and the solenoid valve is de-energized for ≥ 20 seconds. 

A pressure switch is set at the end of the system to monitor the interruption and  pressure loss of the main oil pipeline of the lubrication system. 

Equipped with low liquid level transmitter, which can output low liquid level  signal. 

Equipped with an automatic pressure relief device, the lubrication pump stops  running, and the system automatically relieves pressure. 

Use oil viscosity: 10-100cSt. 

Working life ≥ 1,000,000 times. 

Note: 1. Please use the specified clean lubricating oil; 

          2. Input compressed air  within the specified pressure range.