Amfani da kaya
Haske na matakin ruwa da canzawar matsin lamba (Zabi) ana bayar da shi. Lokacin da ƙarar mai ko matsin lamba bai isa ba,
Alamar mahaukaci ba ta fitarwa. Hasken mai nuna kwamiti yana nuna matsayin ƙarfin iko da lubrication na allurar mai. Ana bayar da tsarin tare da maɓallin ciyarwa, kuma ana amfani da lubrication mai tilas. Saita lokaci: Matsakaicin Matsakaicin Matsakaicina guda ɗaya2min, lokaci da lokaci na lokaci zai zama sau 5 na lokacin lubricating.
Sigogi na fasaha
Kayan abu
da
bayanai | Mota | Lubricating
lokacin
(s) | Lokaci
)
(m | Dogara
matsin lamba | Matsakaicin
Matsakaici
| Ko'ina cikin
(CC / min) | Jirgin saman
bututun
mai
(mm) | Canjin
matsin lamba | da ruwa
matakin
Fitar | Masu ƙoshi | Tuffin mai
(l) | Nauyi
(kg) |
voltage
(v) | Wuta
(W) | (MPA) |
| Bta-c2 | AC110
AC220
DC 24v | 20 | Sarrafawa ta hanyar
waje | 1.5-1.7 | 2.5 | 150
200 | φe | Ba na tilas ba ne | lantarki
Ilimin wutar
a babba
ko
ƙarami | A'a | 2 (Guduro) | 2.90 |
| 3 (Guduro) | 3.20 |
| 4 (resin) | 3.30 |
| 4 (farantin karfe) | 5.70 |
| 6 (farantin karfe) | 6.00 |
| 8 (farantin karfe) | 6.50 |
Yanayin aikace-aikace
Kayan aikin ƙarfe kamar cibiyoyin kwastomomin CLN, Grinders, Lates na CC, da sauransu
Kayan aiki na 3C: Mayar da Mataimakin Mata, Haske Mashin, injin na gilashi, injin niƙa, machine
Kayan Kayan Karfe: Injiniyan Laser, Injiniyan Punching, da sauran kayan aikin sarrafa karfe
Kayan aikin katako: Injiniyan banding banding, keken katako, da sauran kayan aiki na itace
