NEW product High pressure lubrication pump

This is a product that can be used on large machinery

For the lubrication of these large machinery, such as wind power plants, mining machinery, logistics and transportation rails and other equipment, the lubrication of construction machinery, you can use this lubrication product

Performance and characteristics
1,The working cycle of the lubrication pump can be controlled by the host PLC or an independent controller.
2,It is equipped with a pressure regulating valve device,which can independently  set the working pressure of the lubrication pump to ensure its work safety
3,Equipped with low oil level transmitter,normally open contact or normally closed contact can be selected according to the system
4,Please use a refueling gun or a refueling machine to add grease to the oil storage tank of the lubrication pump to prevent  impurities and air from mixing into the lubrication system,thereby improving the use effect of the lubrication system
5,The lubricating system is equipped with a pressure switch,which can effectively montitor the lack of pressure such as interrupted flow and leakage of the lubricating system pipeline

6,The material of the pump body is alumium alloy,which has excellent physical properties such as high strength and light weight.

7,Applicable lubricant range(at standard temperature):lubricating oil>N68,grease NLGI000#-2#

8,The grease outlet can be directly connected to the lubrication point,or it can be connected to a progressive distributor for multi-point lubrication

9,Use oil scraper oil pressure device

10,A single pump body has 1-5 grease outlets to choose from,and the selectivity is large .

11,Equipped with safety relief valve and pressure gauge to monitor the working condition of the system at any time.

12,There is no pressure relief valve device in the progressive system,it needs to be used with the GPA/GPB/GPC distributor .

 


Post time: Aug-23-2022