HLC lubrication sentinam statione

Short description:

Warantum tempus, II annorum

Min.Order quantitas: I piece / pieces

Supple facultatem: (X ) Piece / pieces per mensem

Quantitas:



Inquiro Addere ad cartallum

Lubricatae ad opus principium Thomas Thomas

After the lubrication pump station is connected to the working power supply,set the operation mode according to the 'operation flow chart'of the program controller,so that the motor is energized,and the gear pump starts to work .The lubricating oil is output through the oil outlet filter.The maximum pressure of the system is set by the overflow valve (set at 8MPA when leaving the factory).The output lubricating oil enters into the storage oil in the quantitative distributor.When the quantitative distributor is filled with lubricating oil,the motor and electromagnetic reversing valve are de-energized,the system is unloaded,and the quantitative distributor injects the lubricating oil in the memory into the lubrication point to complete and oiling process.

Cautiones

Dosing distributores debet installed quatenus possibile ubi lubricatae

puncta sunt conuenerunt. Et interiore diameter principalis olei pipe erit

≥Φ4.

Non licet install a reprehendo valvae inter lubrication sentinam statione

et quantitativum distributor ne ratio

depressurized.

A 25u ~ 125u oleum filter debet esse installed ad oleum exitum de lubricating

Sentinam statione ut systema oleum est mundus et liberabo de impudicitiis.

Ante connectens metering dispensator, omnes fistulae debet diligenter

rubens (vel inflantur) decontaminate et ne lutum ab intrantes

et oleum exhaurire et lubricatae puncta.